The maintenance common sense of the four major systems of forklifts, this should be collected!
Summary:One. Hydraulic system1. Clean the hydraulic oil tank, change the hydraulic oil and clean the filter.2. Check that the hydraulic pump, oil hose, joints...
One. Hydraulic system1. Clean the hydraulic oil tank, change the hydraulic oil and clean the filter.2. Check that the hydraulic pump, oil hose, joints and oil seals are not leaking.3. If necessary, adjust and clean the hydraulic oil valve.Two.Chain components1. Clean the lifting chain, chain shaft and add lubricating oil.2. Clean the driving chain, bearing and add lubricating oil.3. Check the lifting chain for cracks and damage.Three. Transmission system1. Clean the gear box and change the gear oil.2. Clean the rotating bearings, bearings and add lubricating oil.3. Check and adjust the brake system and the movable joints and add butter.4. Check the automatic gearbox system, change the automatic gearbox and change the filter.5. Check the tire screws and tires.Four. the circuit system1. The overall circuit dust removal.2. Check and adjust the ratio of sulfuric acid in the battery, clean the surface of the battery, and tighten the battery terminal.3. Whether the insulation and connecting parts are damaged or loose.4. Check the contact points for wear.Five. Check the lifting, driving, and hydraulic pump carbonization.6. Check the light signal system, if necessary, replace the bulb and fuse.7. Check the sensitivity of each control system.https://www.chinatabletruck.com/