How to deal with emergency after the solid tire of the forklift is damaged?
Summary:Solid tires are currently only used for high-load vehicles or machinery running at low speeds, and are also used for fixed-position machinery compared...
Solid tires are currently only used for high-load vehicles or machinery running at low speeds, and are also used for fixed-position machinery compared with pneumatic tires because solid tires are more wear-resistant. Solid tires are mainly used for industrial vehicles such as low-speed and high-load hoisting vehicles, traction vehicles and flat trucks, and solid tires are also widely used in various industries. If there is damage, what should be done? The following electric forklift manufacturers will take everyone to popularize it!
1. When small holes are found in the inner tube, hot patch or cold patch can be performed. File the roughness around the damaged part of the inner tube, stick the fire repair rubber to the damage, and make the hole and small hole just in the middle of the repair rubber, then install the tire repair clamp against the normal fire repair rubber, tighten the screw, and then ignite Heat the heating agent on the glue and wait for 10-15min to bond tightly.2. When solid tires have cracks, holes, blisters, delamination, etc., they should be repaired or refurbished according to specific conditions. When there are successive cracks around the carcass of the tire casing, the tread rubber has been polished and there are large holes, the carcass line layer has annular cracks and the whole circle is separated, it should be replaced.3. Timely replacement: If the inner tube is folded, severely cracked, aging, sticky, deformed and other problems cannot be corrected, it needs to be replaced in time. Let's develop a regular check of tire pressure, and try to check it every other month. Insufficient tire pressure should be made up in time.