Summary:The elevator is a kind of universal transmission equipment, and the type selected in different industries is different. The rail-mounted elevator is o...
The elevator is a kind of universal transmission equipment, and the type selected in different industries is different. The rail-mounted elevator is one of our control, the aspect ratio is 150-300mm, and it is not suitable for foundation pit excavation. The workmanship does not require upper lifting points, and the methods are diversified (single column, double column, four column). So what should I do if the speed slows down in the application?
1. The improvement of rated value rate and rated value load capacity means that the output power of the server should be increased, and the traction machine one size larger should be used. Once the output power of the server is expanded, the output power of the soft starter will also increase, and the driving force line of the AC contactor will increase.
2. Other equipment, such as optical leveling power switch, power switch for lowering the speed, safety clamps, slide rails, guide shoes, etc. will all change due to speed, which depends on the company’s equipment The classification is related. 3. The relay of the electric hydraulic pump system software can adjust the speed appropriately. If it has been adjusted to a larger value, try to check whether the gear oil of the rail elevator is enough, whether the hydraulic cylinder is leaking, etc. If there is no problem, the speed is still If it is slow, the manufacturer recommends to replace the system software of a larger sewage treatment plant. 4. Rail-mounted lifts should meet relevant standards. Lifting platforms are generally divided into fixed lifts, mobile lifts, self-propelled lifts, and lift trucks. The working environment temperature is -15-+40℃, the rising speed of the worktable should be 6-9m/min, and the lowering speed should not exceed 6m/min.